Long Life Magnetic Recording Heads and Card Readers for the SmartCard and Magnetic Stripe Card Industries
  }  My Account   }  Checkout
Long Life Magnetic Heads for the Magnetic Stripe Card Industry
{ page 1 | page 2 | page 3 }
DesignGuide 1
Magnetic Head Core Material Selection
By Larry W. Ditty, Executive V. P. Technology, brush Industries, Inc.

Effects of materials selection on HiCo/LoCo recording and magnetic head life

The wide range of media available for high and low coercivity recording 300 to 3500 oersted makes magnetic head core material selection important. When environmental (life) considerations are also added into the equation, material selection becomes even more critical.
 
For the record, ISO identifies LoCo media as up to 600 oersted, above 600 oersted is identified as HiCo media. This Design Guide will aid in selecting the correct material or combinations of materials to meet your magnetic head requirements. These requirements may vary from, low use ATM's ,100 or less transactions per day to high use turnstiles, several thousand transactions per day. Media requirements can range from 300 to 5000 oersted with the possibility that the head will need to work with several different media's in the same system 300 to 2750 oersted.
 
The design guide will aid in core material selection to meet your Magnetic Head requirements with the most cost effective material or combination of materials available.

Life comparisons of the various core materials have been derived from brush research and independent studies conducted by the Pennsylvania State University and Bucknell University and experience with specific high traffic turnpike transit data site locations, actual results can vary under different operating conditions.

>>next page


{ Home | Magnetic Head Products | Magnetic Head Advantages | Long Life Magnetic Head Technology }
{ Long Life Magnetic Head Products | Low Cost Magnetic Heads  | Careers at Brush Industries }
{ Magnetic Head Success StoriesSupport | Directions | Tour Our Company }

{ Brush Industries® | Third & Reagan Streets, Sunbury, PA 17801 USA }
{ Tel: 800-233-0362 | Tel: 570-286-5611 | Fax: 570-286-2649 } 
{ email: info@brushindustries.com }

Brush Industries is an ISO 9001:2008 certified company Brush Industries is an ISO 9001:2008 certified company

Links for Magnetic Recording Heads, Magnetic Stripe and
Smartcard Testing and Equipment and Magnetic Stripe and Smartcard Readers
long life magnetic head swipe readers Waterproof and weatherproof magnetic stripe credit card readers for access control
magnetic head card swipe reader Waterproof and weatherproof magnetic stripe credit card readers for parking garages
magnetic reader swipe card reader Waterproof and weatherproof magnetic stripe credit card readers for car washes
magnetic recording head fare collection Waterproof and weatherproof magnetic stripe credit card readers for outdoor kiosks
read head magnetic strip reader Waterproof and weatherproof magnetic stripe credit card readers for college housing access
read write head magnetic stripe reader Waterproof and weatherproof magnetic stripe credit card readers for unattended gas stations
magnetic heads magnetic stripe card reader  
f2f encoder micr reader  
card readers micr check reader  
credit card reader sidewinder magstripe card reader  
magnetic card reader magstripe card readers  

Hypermium™, Sidewinder™, Duet™, and Hercules™ are trademarks and Brush® and Supermium® are registered trademarks of Brush Industries®
All Website Content Copyright 1997-2010

Website by MoJo Active